 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PD075-HL3 Low Cost Analog Photodiode FEATURES * * * * * * High Linearity High Responsivity Low Dark Current Dielectric Passivation 100% Purge Burn-in Planar Structure PD075-HL3-5xx SC Receptacle PD075-HL3-5xx ST Receptacle APPLICATIONS * * Low Cost Optical Receivers to 1GHz Return Path CATV Optical Receivers PD075-HL3-3xx SC/APC Pigtail PD075-HL3-5xx FC Receptacle PRODUCT DESCRIPTION The PD075-HL3 is an InGaAs photodiode with a photosensitive region 75m in diameter. It has been designed for use in low cost, low noise, linear analog optical receivers. Planar semiconductor design and dielectric passivation provide low noise performance. Reliability is assured by hermetic sealing and 100% purge burn-in (200C, 15 hours, Vr = 20V). The device can be either pigtailed with SC, FC or ST connectors (UPC or APC) or mounted in an SC, ST of FC receptacle. Custom packages are also available. ELECTRICAL CHARACTERISTICS Table 1: Electrical Specifications PARAMETER Dark Current (ID) Capacitance (1) Responsivity at 1310nm Responsivity at 1550nm 3dB bandwidth (75 bias) Single Second Order (SSO) (2) Single Triple Beat (STB) (2) Optical Return Loss (Pigtail using SMF-28) Optical Return Loss (Receptacle, APC connector) Operating voltage MIN 0.80 0.85 2400 50 40 TYP 0.1 0.8 0.90 0.95 2700 -70 -80 55 45 5 MAX 1.0 0.9 -65 -70 20 UNIT nA pF A/W A/W MHz dBc dBc dB dB V 1) 5V bias voltage (2) SSO and STB measurements to 500MHz using 2 and 3 tones at 40% OMI, 0dBm optical input, 1310nm, 12V bias. PD075-HL3 Table 2: Absolute Maximum Ratings PARAMETER Forward Current Reverse Current Reverse Voltage Optical input power Operating Case Temperature Storage Temperature Soldering temperature (10 seconds) MIN -40 -40 MAX 5 250 30 5 +85 +85 +250 UNIT mA A V mW C C C Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. PIN LOCATIONS - Standard Dimensions: INCHES [mm] ORDERING INFORMATION Table 3: Standard Part Number PD075-HL3-300 PD075-HL3-520 Options SC/APC pigtail, 1 meter SMF-28 fiber, 3 pin SC/APC receptacle, 3 pin Table 4: Custom Part Number PD075-HL3-3xx PD075-HL3-5xx Options Number of pins: 2, 3 Fiber length: 0.5 meter, 1.0 meter Fiber type: Single mode (SMF-28) or custom supplied Connector Type: SC, ST or FC. APC or UPC Number of pins: 2, 3 Connector Type: SC, ST or FC. Aligned for APC or UPC Please contact Anadigics for the specific part number and pinout that suits your needs ANADIGICS, Inc. 829 Flynn Road Camarillo, California 93012, U.S.A. Tel: +1 (805) 445-4500 Fax: +1 (805) 445-4502 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data sheets are subject to change prior to a product's formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. Rev 1.0 2 |
Price & Availability of PD075-HL3-520
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |